Important before ordering: The camera sits in a manual tailgate handle. If your car has an electronic handle (opened with an electric button), the camera is not compatible. If in doubt, send us a photo of your handle before you order.

170° 1080P Reversing Camera for Ford Mondeo MK4, Fiesta and Focus

Upgrade your Ford with a practical 170° 1080P reversing camera that gives better visibility behind the car when reversing, parking and manoeuvring in tight spaces. This reversing camera is designed as a discreet aftermarket solution for selected Ford models and is particularly relevant for cars where the camera is to be fitted in the tailgate or at the existing handle/camera location.

The camera gives a wide view with a viewing angle of 170 degrees, so you can more easily get your bearings around obstacles behind the car. This could be kerbs, walls, posts, parked cars, low objects or other objects that can be hard to see from the driver’s seat. With 1080P image quality you get a clear and detailed picture on a compatible screen, Android radio or CarPlay unit with a reversing camera input.

Always start from the dimensions

The most important thing with this product is the physical fit. The reversing camera measures approx. 98 x 42 x 83 mm. You should therefore always compare these dimensions with the car’s original camera holder, tailgate handle or mounting area before you order.

Ford models can vary depending on model year, body type, trim level, market and factory-fitted equipment. Even if the model is on the compatibility list, it is therefore not enough to choose only from car model and model year. The most accurate check is to measure the existing part and make sure it matches the camera’s dimensions of approx. 98 mm in length, 42 mm in height and 83 mm in depth.

Fits selected Ford models

This reversing camera for Ford is relevant for selected variants of the following models:

• Ford Mondeo MK4, model year 2007-2014
• Ford Fiesta, model year 2014-2017
• Ford Focus, model year 2010-2013
• Ford Focus 2 MK2, depending on physical fit
• Ford S-Max, depending on physical fit
• Ford C-Max, depending on physical fit
• Ford Kuga MK1, depending on physical fit

Please note that compatibility should always be checked against the dimensions. If the car’s existing handle or camera location does not correspond to approx. 98 x 42 x 83 mm, this model may require adaptation or be wrong for the car.

Benefits of this reversing camera

• 170° wide angle for a better view behind the car
• 1080P image quality when used with a compatible screen
• Discreet design for selected Ford models
• Suitable for parking, reversing and everyday manoeuvring
• Can be used with many Android radios and CarPlay screens with a reversing camera input
• A good solution when retrofitting a reversing camera to a car without an original camera
• Relevant for the Ford Mondeo MK4, Fiesta and Focus, when the dimensions fit

Specifications

Ideal when upgrading to an Android radio or CarPlay screen

This Ford reversing camera is particularly well suited if the car is being upgraded at the same time with a modern Android radio, CarPlay screen or multimedia unit with a reversing camera input. When the camera is correctly fitted and connected, the camera image can be shown on the screen when the car is put into reverse gear, depending on the car’s and the radio’s setup.

During installation the camera’s video signal, power supply and any reverse trigger must be connected correctly. On some cars the wiring harness may need to be adapted, depending on whether the car has an original camera, factory radio, CANBUS control or an aftermarket multimedia system.

Important before purchase and installation

Before you buy this reversing camera, you should check three things: the car’s model and model year, the physical mounting space and whether your screen or radio supports the camera’s signal. The most important check is the physical fit, as the camera’s dimensions are approx. 98 x 42 x 83 mm.

If in doubt, it is recommended to measure the car’s existing tailgate handle or camera location before ordering the product. Professional installation is recommended if you have no experience with reversing cameras, car radios, power connections or cable routing in a car.